Factory batch balloon dot adhesive, special balloon dot adhesive, 10mm seamless dot adhesive, DIY positioning adhesive, balloon wedding round, round dot adhesive, small particles, convenient to use and practical
Still deciding? Take a sample and try it out. >> Get sample
Product Information
Sort: spot goods
Place of Origin: China
Brand: Wan Shuo
Material: Others
Packing QTY: 0PCS/CTN
Packing List: The optional packaging is
Descriptions
Pay special attention
Glue comes in different models, and the prices of various models are not the same. Please consult the store before placing an order.
Name: Super Sticky Ordinary Double-sided Tape dots
Weight: Approximately 13g
Specification: The diameter of the glue dots is approximately 1.4cm.
Application scenario: It is used for the decoration of wedding rooms. Stand the glue dots on the wall or ceiling to fix the balloons, which can create a floating effect. It is economical and practical.
Dot adhesive dots: Also known as positioning adhesive dots, traceless adhesive dots, or universal adhesive dots, are preformed adhesive dots that can be adhered to both sides.
Product features: Transparent color, instant adhesive upon opening, more convenient and environmentally friendly than traditional double-sided tape. Faster and safer than hot melt adhesive!
应 用：固定气球，红包、请帖封口，装饰婚房，婚车装扮，工艺品制作，蜡烛固定，等
注 意：往气球上粘贴时一定要一次到位，不然从气球上分离胶点很容易把气球撕破。
If you want to reduce the viscosity, you can stick it on your hand twice before using it.
Glue spots can damage some sprayed surfaces, such as white plaster walls, etc. It is recommended to conduct a test on the bonding surface before use and then select the viscosity!
一)、尺寸：按物件大小配套胶点尺寸；
二)、厚度：按物件重量及接触面或厚度及硬度而定；低厚度的通常用于贴扁平的基材；中、高厚度的适用于粘贴圆形和不规则形状基材。
三)、粘度：a)按物件表面光滑程度；b)平放或是有凹凸面；c)两物件分离时要求“无痕”的程度或是否需要永久粘固。
Standard specification dimensions of removable glue points:
一)、大小：圆形/方形/长方形/条状,每粒的直径由5mm-20mm范围；
二)、厚度：由0.2mm-2.0mm；
三)、粘度：低/中/高；
四)、包装：卷装/张装；
五)、The size can be customized according to customer requirements
The usage method of glue dots
（敬告：切勿用手指直接取出胶滴）
1、本产品不能和油及灰尘接触，它们会影响产品的粘性及附着力;粘结表面须保持清洁干燥，清洁后方可用胶点粘贴。
2、操作时要避免手指与胶面的接触，必须把物件直接放在“胶点”面上轻按，随即转移在物件上，即可贴在另一物件上即成,粘贴后须用力压一压，以保证胶面的充分接触和粘贴面内无空气残留，使粘贴效果更佳。
3、低厚度的通常用于贴扁平的基材；中、高厚度的适用于粘贴圆形和不规则形状基材。
Picture
