The manufacturer wholesales kitchen sink water outlet valve by stepping on the foot, faucet by stepping on the foot, and contactless single-cooling faucet
Still deciding? Take a sample and try it out. >> Get sample
Product Information
Sort: spot goods
Place of Origin: China
Brand: Home decoration building materials
Material: Home decoration building materials
Packing QTY: 292PCS/CTN
MEAS.: 45cm * 32cm * 40cm
CBM: 0.057600CBM
G.W.: 58.316KGs
N.W.: 57.816KGs
Packing List: 854061
Descriptions
 Customer Service Center |
Pre-sale customer service |
|
After-sales customer service |
|
Business hours |
Yiyuan Sanitary Ware, dedicated to serving you!
The product is issued in the public version by default (without trademark or factory address). If you need a trademark, please make a note
Detailed diagram of the inclined stepping body
Special - Re-cast high-standard body
Question 1: Can foot-operated flush valves be used at home?
AnswerDear, it's fine for home use. However, the water pressure at home must be high, higher than that of the municipal water supply. If the water pressure is low, the force will be small. It is recommended that you first understand the water pressure before purchasing
The water pressure in general construction sites, entertainment venues, hotels and other places is relatively high, so there won't be any installation issues Oh, that's the question ~
Question 2: What are the requirements for installing the inlet and outlet pipes of the flushing valve?
Answer冲洗阀进水管必须是6分（25mm/DN20）或1寸（32mm/DN25）的管子，出水管为1寸（32mm/DN25），4分（20mm/DN15）水管不能使用，水压太小，导致冲洗不足哦~~The general design of a water tank is a 4-way water pipe. Therefore, if the waterway of the water tank is designed, a flushing valve cannot be installed.
Question 3: Are there any requirements for the waterway during installation?
Answer安装家庭的水管水路必须尚未铺好，否则水路已经固定了就可能无法匹配安装哦~Therefore, if a new flushing valve is to be installed, it is necessary to purchase it as early as possible for reference when laying the waterway
Question 4: I'm not installing a new valve. I'm replacing the broken one. Are there any installation requirements?
Answer购买的时候，需要测量好进水口的螺纹尺寸（是1寸还是6分），以及进水口中心到出水口底部的高度（否则进水口接好后，出水口无法和原来的水管连接（出水管太长或者太短，太长还可以据掉，太短了就没办法连接了）If it is a replacement, be sure to measure the dimensions accurately. There is no such requirement for new installations. Please refer to the data in the product parameters for the measured dimensions.
Picture
